After feeding the earth wire through to the bushing hole, Lil carefully hammered the bushing into its hole
A quick continuity test to make sure the wire didn't get damaged during the hammering
And within minutes all four bushing are hammered home
The stop tail and bridge fit perfectly!
Now with a bit of help to steady the drill Lil fitted the pick-ups. The top and bottom strings were placed in order to make sure the pick-ups were positioned properly.
Screwing them down
Drilling the holes for the strap buttons.
That's it for today, tomorrow we'll get the tuners fitted and paint the wiring cavities with shielding paint.
No comments:
Post a Comment